Naboo – Living History in the Star Wars Galaxy

Updating the Naboo partizan – Inner Persona

While the new-home renovations continue, I am still at least a month from having a functional crafting studio or workshop again, and so in the interest of avoiding a lull and having to overcome the inertia to resume publishing (and to get some pieces out of my drafts!), I thought this would be a good time to check in with the state of some of my galactic impressions. Links to each of these breakdowns will all be collected at the Personas and Impressions page ^above^!

Seeing as how I’ve continued to rework this impression in the years since its ‘first draft’, I want to show how things have progressed, and also serve as a benchmark for any changes I make in the future. Since Naboo pretty much drops off the galactic stage after about 18 BBY, this impression required a large amount of ‘frog DNA’ to extrapolate and create a complete kit from a specific time and place. However, as I hope will become clear, this method of taking the truth of my own life and ‘translating’ it to an in-universe context works very well for creating a fleshed-out but believable persona that stays within the bounds of the setting. (Numbers in [brackets] refer to reference sources in end notes.)

Naming:

‘Steen Olis’, in Naboo’s informal Futhork script

Turn your own life details into a believable galactic backstory!

Galactic Style Guide – Luggage

Welcome back to another installment of the Galactic Style Guide, the series where we break down the ‘Star Wars aesthetic’ in order to help you create a more authentic ‘outer persona’! While the Galactic Starcruiser may no longer be taking on passengers and has instead been gathering dust for the last year, I’m long overdue to examine examples of in-universe LUGGAGE! Back in its heyday, many Starcruiser passengers considered a themed suitcase essential for voyage immersion, but most of the ones I saw went pretty far off the mark from what we actually see onscreen…but there’s never a bad time to do a little research and try to improve your authentic ‘Star Wars eye’!
(But first, a quick FYI/programming note before we begin: this entry and next month’s are fairly quick and dirty, but there’s a good reason: my wife and I just bought a house, and naturally, real life takes priority over hobbies! I fully expect to be knee-deep in renovations well into the New Year, but hopefully things go smoothly and I can get back to more regular and in-depth posting before too long. With that said, let’s get started!

There aren’t many (if any?) examples of what we would recognize as luggage in the Original Trilogy. Luke has his blue backpack and a couple of trunks on Dagobah, but that’s about it – most everyone travels extremely light otherwise! It’s not until Episode I that we get a good look inside a ship’s cargo hold to see what traveling gear looks like in-universe.

The scene in which Padme cleans R2-D2 gives us our best look:

What does in-universe luggage have in common?

Upgrading the Rebel persona: Naboo tunic, Mk II

Since debuting my first draft Rebel-partizan-on-Naboo impression back in 2018, further research has caused me to continue to refine the kit. In addition to needing some more layering, the main thing that needed upgrading was the shirt. My ‘Mark I’ Naboo shirt was not (aside from the Mandarin collar and the color) based on any specific onscreen examples, and the use of a Vietnamese ao dai pattern was only inspired by costume designer Trisha Biggar’s comments re: the general use of Asian elements in Naboo fashion (and at the time I liked the asymmetry of the design). However, I realized that I should probably wear something that more clearly ‘read’ as Naboo in origin, and it should probably be constructed of a lighter material as well – the Mk I was sewn from a ‘rustic’ 7.1-ounce linen.
Since this piece is intended for a Galactic Civil War era persona, I really wanted to try and move away from the traditional Naboo style seen in the Prequels, especially the Renaissance-heavy designs of 32 BBY:

“We had designed Naboo more or less around Art Nouveau (we called it “Space Nouveau”), which was based on organic, plantlike forms. **The costume ideas looked gorgeous on the women, but when you put guys in them, they didn’t look very tough.**” – Ian McCaig, Dressing A Galaxy, p.72.

Roughly inspired by the lines of the traditional Indian kameez, I pored over my reference library to see what Naboo male fashion stuck around through the years while noticing any common elements:

sartorial synthesis and more, within!

Project: Naboo pilot’s helmet part 3

Welcome back! This is the third and final part of my buildlog for attempting to scratchbuild an N1 starfighter pilot’s helmet. When we left off, I had the scaling figured out and patterns drafted, and the side pieces and earmuff details created. Now it’s time to craft the helmet’s shell itself.
To get an idea of how the helmet would look, I transferred the patterns to lightweight cardboard and taped everything together to make a rough mockup of the whole assembly to check the general shape:

This was bonded along the seams (inside and outside) with brown paper bag and PVA glue (left) before brushing both exterior and interior with Bondo resin (center):

Continue reading to see the Step-by-step to completion!

Project: Naboo pilot’s helmet part 2

Hello there! Welcome back to my buildlog for recreating an N1 starfighter helmet – let’s not waste any time and get straight into the process!
In my last post I determined how big the components of the helmet would be, and decided on a method for construction (Pepakura). While I originally wanted to make all parts of the helmet using Pep, I decided that the Y-shaped-part-that-holds-the-earmuff was complicated enough that I should make them out of something more substantial.

I first considered making a mold and casting them in resin, and when I want to feel like a real prototyper, that means carving a positive from amber ‘victory wax’. Well, after a few days I had built up the shape pretty close – I figured I would cast the pieces fairly roughly, and then do the fine shaping on the casts, since resin doesn’t heat up and deform in-hand. However…

Upgrading the Rebel persona – Naboo pilot’s helmet part 1

_{Before we get started, a quick scheduling note: the project that follows was a long and involved process, involving many different skillsets (including—but not limited to—pattern drafting, sculpting, casting, and woodcarving). Instead of trying to cram all that into one mega post, I’ve decided to split it up into three parts, and rather than dole them out separately across most of this month, I’ll be posting all three today (we’ll return to regular programming next week). With all that out of the way, let’s get started!}

With little else to occupy my time while backpacking thousands of miles last year, I spent a large part of my AT thruhike thinking about ways I could improve my various Star Wars reenacting/living history kits when I got back home. Along the lines of adding a Q2 holdout blaster to my Rebel-on-Naboo impression, I wondered if there was anything else I could do to help anchor my kit to that specific planet. While the popular conception of Naboo is of a peaceful, pacifist culture, that’s not exactly the case. While they may not have a proper standing army, the Royal Naboo Security Forces are plenty prominent in the pre-Imperial period and have plenty of hardware to incorporate into a kit. Just as Earth military gear of past generations can trickle down to the civilian market as surplus and family heirlooms lay forgotten in attics, I figured something similar could happen on Naboo as well, especially following their effective demilitarization under the New Order.
While I was never really onboard with the ‘pearl hats’ of the Royal Guards or the Security Guards and Officers’ visored caps, the headgear of one RSF branch felt like it had more Star Wars-y pedigree than the others: the Naboo Starfighter Corps. Their flight helmet is so iconic yet has such a grounded design I thought it might be fun to add one to my kit…and after supper one night in our tent I made a quick doodle of what a Naboo partizan might look like wearing one:

And once I make a character sketch, it’s all over – I *have* to make it a reality!

Once we returned home, I was able to do some research and see what kinds of options I had. Somewhat unsurprisingly (?) it doesn’t seem as if many fan-makers have tackled the N1 helmet…as far as I could tell, only one other (rather exquisite) fanmade example existed, produced by one ‘Godzilla’ (of super-accurate Tusken Raider mask fame). Perhaps one reason for this dearth was because an official N1 helmet replica does exist…they pop up on eBay from time to time but are typical quality for Don Post – they’re basically just a cast plastic shell with a mediocre paintjob – and more than I want to pay for such a thing. After being away from my workshop for so long, I really needed a project to get back in the Maker groove, and thought a scratchbuilt Naboo pilot helmet would do the trick nicely! The obvious question was: HOW?

Project: Naboo pistol retool

Near the end of last year, while scrolling through some Star Wars groups on facebook I came across someone showing off a bunch of white and fluorescent orange plastic blaster props made by Rubies. While otherwise just another pointless ‘hey look the stuff i ordered got delivered’ post, one of them was something I had no idea even existed in a mass-produced form—the Merr-Sonn Q2 hold-out pistol. (Fun fact: supposedly this blaster was designed by George Lucas himself, and was prototyped from sketch to prop in just one day). While it wasn’t made by them, as a pre-teen in 1999 such a weapon is permanently associated in my mind with Padme Amidala and the planet Naboo, especially given its decidedly un-militaristic Art Deco styling. Seeing that such a replica existed (and was readily affordable!), I realized that including a Q2 in one of my Naboo-based impressions would be a great way to better connect kit and homeworld—especially since those ‘outer personas’ diverge from what most people think of when they picture Naboo style (the typical ‘Renaissance’ style is really a nobility thing).

Since this model blaster is only ever wielded onscreen by Padme or her handmaidens, I had always assumed it was a specially-made pistol just for Royal use. However, skimming through some RPG materials I came across the Q2 included in a listing of common blasters of the Galaxy, where it was listed as acceptable for use in the pre-Empire, Imperial, and New Republic periods—perfect for any of my needs!

this was much more than just a paintjob!

Project: B1 battle droid arm (part 2)

Just in time for Halloween, I’m proud to finally be able to show off a project that’s downright skeletal!:

When we last checked in, my battle droid arm project had been printed, resin-filled, cleaned up and given a base coat of paint. Next came the fun part: assembly! To allow them the proper range of motion, the hand and forearm joints were articulated with turned pins and set screws, as it appears the original was made (although I have not yet added the tiny set screws in the fingers; my thumb can do more than just rotate in a circle, as it has an actual captive ball-and-socket):

As you can see, I really need to add some extra-grungy finger grime!

To really sell the artifact as a battlefield relic, I originally wanted to include some cables or wires poking out of the top of the shoulder, but my research turned up the surprising conclusion that such details wouldn’t be necessary.

Project: B1 battle droid arm (part 1)

In the last several years of browsing Star Wars crafting topics on social media, I’ve determined that about 95% of replicas (especially 3D-printed ones) I’ve seen are of weapons, helmets, and armor associated with a tiny range of recognizable-to-the-public Face Characters or nameless Troopers. You will almost never see mundane artifacts replicated in the prop-building community…as one RPF user asked while seeking info on how to replicate a Kloo horn, “Anyone have any ideas or did nobody ever care because it’s not a lightsaber?”

As I was brainstorming my NRAC (New Republic Archeological Corps) persona last year, I began thinking about what kinds of artifacts I could potentially show off at a convention booth, hands-on interpretive historical talk, or similar venue/event. With Naboo’s focus on arts and learning, and the presence of a notable institution of higher education (Theed University—which coincidentally has the same initials as my alma mater), I felt confident in basing my NRAC impression on a Naboo background. I then began thinking what kinds of items would likely be collected or excavated by a Naboo archeological student, or possibly artifacts that could’ve been passed down through the family.
Around the same time, I saw someone online post pictures of a 1:1 3D-printed B1 battle droid: B1 il_794xN1521245503_mg8s.jpg ‘Wow!’ I thought, ‘that would be amazing to display!’ Unfortunately, I was also living in a very small apartment at the time, and there was no way I had the space to store an almost-2-meter-tall figure I might use for a handful of events each year (if I was lucky!). Also, in terms of realism, what are the odds that my archeologist persona would have a complete B1 droid?
‘Okay’, I said. ‘How about just, like, an…arm?’ Continue reading “Project: B1 battle droid arm (part 1)”

Galactic whittling – shaak

After thinking about other possible pieces of pocket trash, I eventually decided that my partizan and archeologist personas could use a little memento of home. Enter the noble shaak, Naboo’s tick-like ‘space cow’ (meant to be designed as a sheep analogue).

shaakR20200522_125034 Continue reading “Galactic whittling – shaak”