Upgrading the Rebel persona – Naboo pilot’s helmet part 1

Before we get started, a quick scheduling note: the project that follows was a long and involved process, involving many different skillsets (including—but not limited to—pattern drafting, sculpting, casting, and woodcarving). Instead of trying to cram all that into one mega post, I’ve decided to split it up into three parts, and rather than dole them out separately across most of this month, I’ll be posting all three today (we’ll return to regular programming next week). With all that out of the way, let’s get started!

With little else to occupy my time while backpacking thousands of miles last year, I spent a large part of my AT thruhike thinking about ways I could improve my various Star Wars reenacting/living history kits when I got back home. Along the lines of adding a Q2 holdout blaster to my Rebel-on-Naboo impression, I wondered if there was anything else I could do to help anchor my kit to that specific planet. While the popular conception of Naboo is of a peaceful, pacifist culture, that’s not exactly the case. While they may not have a proper standing army, the Royal Naboo Security Forces are plenty prominent in the pre-Imperial period and have plenty of hardware to incorporate into a kit. Just as Earth military gear of past generations can trickle down to the civilian market as surplus and family heirlooms lay forgotten in attics, I figured something similar could happen on Naboo as well, especially following their effective demilitarization under the New Order.
While I was never really onboard with the ‘pearl hats’ of the Royal Guards or the Security Guards and Officers’ visored caps, the headgear of one RSF branch felt like it had more Star Wars-y pedigree than the others: the Naboo Starfighter Corps. Their flight helmet is so iconic yet has such a grounded design I thought it might be fun to add one to my kit…and after supper one night in our tent I made a quick doodle of what a Naboo partizan might look like wearing one:

And once I make a character sketch, it’s all over – I have to make it a reality!

Once we returned home, I was able to do some research and see what kinds of options I had. Somewhat unsurprisingly (?) it doesn’t seem as if many fan-makers have tackled the N1 helmet…as far as I could tell, only one other (rather exquisite) fanmade example existed, produced by one ‘Godzilla’ (of super-accurate Tusken Raider mask fame). Perhaps one reason for this dearth was because an official N1 helmet replica does exist…they pop up on eBay from time to time but are typical quality for Don Post – they’re basically just a cast plastic shell with a mediocre paintjob – and more than I want to pay for such a thing. After being away from my workshop for so long, I really needed a project to get back in the Maker groove, and thought a scratchbuilt Naboo pilot helmet would do the trick nicely! The obvious question was: HOW?

continue reading

Attention! Your input is needed!

Hello there, folks! We don’t have a regular post for you this week, but believe me that next week will more than make up for it (a triple-header, in fact)!

As I was reflecting recently, I’ve been a maker of Star Wars clothing, costumes, props, and gear for over 20 years! After building and growing my skills for so long, I’ve been thinking it might be time to try and turn my hobby into a small business. So…

To help identify my market and see what potential products people might be interested in, I’ve created a short, anonymous survey, which you can find HERE. Your participation will be greatly appreciated – thank you!

Artifact ID: Podracer power cell

It’s a hit!

I had written about this prop years ago, but that was really just noticing that the item Qui-Gon hands Anakin was the same as one in the Episode I Racer game:

Well, last week I decided to enlist the help of the prop hive-mind and posted a thread on the RPF seeking help in identifying this piece, and in a surprisingly rapid timeframe, one of the respondents had it pinned down!

What is it?! And where can I get one?

Galactic Style Guide – Comlinks

Welcome back to another installment of the Galactic Style Guide, where we break down the ‘Star Wars aesthetic’ in order to help you create a more authentic ‘outer persona’! This month, we’re taking a break from ‘soft kit’ to look at a piece of ‘hard kit’ that we would expect to see in the pocket, or on the wrist or belt of most galactic citizens in some form or another: we’re talking COMLINKS!
While comlinks are—like cellular phones—used to send and receive audio signals at long distances, unlike their Earth analogues, comlinks show a remarkable variety in their designs. Ignoring backpack-based comlinks, we’ll break our sample down into handheld and wrist-mounted comlinks.

The first comlink seen onscreen is the C1 model, made by SoroSuub and carried by Imperial stormtroopers (potentially this might also be what Leia uses at the bunker on Endor). If you’re portraying a character in a position to scavenge some Imperial gear, the C1 might be for you! For extra functionality, you can buy a C1-styled Bluetooth-enabled handset at the Galaxy’s Edge park ($60).


As we’ll see next, the propmakers of Episode I made a wide array of prototypes for the Jedi to carry before settling on kitbashing a womens’ razor for the Hush-98 (also made by SoroSuub):

Continue reading “Galactic Style Guide – Comlinks”

Project: Spacer’s Duffel (part 2)

It’s been awhile since I’ve checked in on this project, which was stuck on the back burner for much of last year but has been moving forwards slowly but surely. Inspired by a description of typical spacers traveling the spacelanes with a sturdy duffel bag (FFG Edge of the Empire: Enter the Unknown p.53), my goal is to create an in-universe ‘steamer trunk’ covered with souvenirs of galactic travel for use with my New Republic Archeological Corps impression.

Before getting too carried away with the weathering and distressing, I wanted to first add a few in-universe patches! A brief browse through Etsy or facebook’s SW Patch Collectors group will reveal a mind-boggling number and variety of Star Wars-themed embroidery, but somewhat unsurprisingly the vast majority are not suitable for living history purposes: face characters, divergent stylistic interpretations, pop culture mashups, event commemoratives, and general ‘novelty’ designs (i.e. things that make me ask, “WHYYYY?”) abound. If that group is any indication, lots of folks want patches that let others know they are a Star Wars Fan, but not so many are interested in authentically inhabiting the Star Wars setting…disappointing. However, a few daring individuals have been producing patches that actually reflect an in-universe style!

More patches (and where you can get your own) below!

Upgrading the Rebel persona: captured armor

Reb-leg 202010-2When I started putting together a Rebel partizan impression a few years back, I initially had the idea—inspired by real-life guerillas’ practice of appropriating enemy equipment—to include a piece or two of captured Imperial hardware in the kit. I was very aware of the temptation to overdo it…too many cosplayers let their imaginations run wild and pretty soon a simple ‘Rebel fighter’ costume becomes an unrealistically fully-armored supertrooper.  Since s Alliance doctrine holds that “complete freedom of movement is more useful than the dubious protection provided by armor—which rarely stops a blaster bolt anyway” (WestEndGames, Rebel Alliance Sourcebook, p99), we don’t have a ton of examples of Rebels wearing extensive armor; even this more modern source depicts a Rebel ‘heavy’ gunner with only an arm’s worth of armor:

reb-heavy
FantasyFlightGames: Age of RebellionForged in Battle, p 82

I reasoned that while a Rebel partizan would probably do most of their shooting from a prone position, anything to give an advantage in taking a stable shot would be desirable, so with this in mind (and to keep things simple), I decided to order a single Stormtrooper shin/calf from Walt’s Trooper Factory, along with a ‘sniper’ knee plate: Continue reading “Upgrading the Rebel persona: captured armor”

Staying true to the aesthetic

(I had originally scheduled this to post a few weeks from now, but since writing it the pitfalls described below keep popping up on my feed, so I couldn’t hold my tongue any longer.) After seeing more than my fair share of Star Wars costumers and their outfits online, I’ve noticed a particular trend in the last year or two across various social media platforms, mainly in the case of the Galaxy’s Edge-inspired/Batuu-bounding or OC crowd:

If Luke had trained on Batuu…

The desire to slap a Rebel Alliance starbird, Jedi crest, Sith symbol, Mickey Mouse, or Aurebesh letters on bloody everything seems very strong with this segment of the fandom, and the big driver of this, I think, is of course the consumer market. As a quick test, let’s do a image search for ‘Star Wars backpack’.

Continue reading “Staying true to the aesthetic”

Project: Jedi ‘SCUBA tank’

This project has spent far too much time in the WIP drawer, but I’m happy to say that after a recent bit of prime scavenging, it’s finally finished up!
A99-finished20200805-1.jpgAfter assembling my first functional kit (Silo, washout Jedi from the Agricultural Corps) for Star Wars living history purposes in 2016, I first got the idea to add some Jedi accoutrements about two years ago. I was using the impression to teach mini survival workshops, and since Silo didn’t have a lightsaber, I figured he should at least have some recognizable Jedi gear in his belt pouches to help sell the impression. I reckoned the Aquata A99 breather would be a good fit, since I could use it as a prop to underline the first element of the Rule of Threes—you can’t last three minutes without breathable air.
I couldn’t wait to get started on a new project, so I pulled out my reference books and…immediately ran into a roadblock. Continue reading “Project: Jedi ‘SCUBA tank’”

A295 rifle conversion update

The quarantine project queue continues apace! It’s been a couple months since I started my functional A295 blaster rifle project, so I thought it was time for an update on how things are progressing.
Since I’m not scratchbuilding a prop gun, the steps to convert from StG44 to A295 are actually relatively simple, and most everything is reversible:

-Step 1: cut off the protruding rod* (okay, that one’s not reversible 😉

gas20200307
*fun fact: since it doesn’t have a cleaning rod or ramrod, this post originally allowed three soldiers to make a tripod and keep their rifles out of the muck.

Continue reading “A295 rifle conversion update”

Project: vintage thermos facelift

Greetings from quarantine!
thermal b4While the world may presently find itself in the grip of a pandemic, one silver lining does exist. While it can be stressful in other ways, a month-long quarantine lockdown has the unexpected benefit of suddenly giving crafty-minded folks a lot of time with which to finish ‘backburner’ projects, and so—as several of my other WIP projects are currently stalled due to quarantine-created supply-bottlenecks—I thought I would share one item I have been able to finish up during the current situation.
Back in December or January(?) I snagged the above gaudy orange thermos from the thrift shop for (I think) $2. It didn’t look especially Star Wars-y at first, but my ‘propmaking eye’ saw that it had definite potential, and I’m very pleased with how it turned out! Continue reading “Project: vintage thermos facelift”