Project – Belt Bottle

As is becoming my usual tendency, this project began as a quick burst of creative energy, only to be followed by months of hiatus until some right material is found, and then another hiatus until my craft docket or mental bandwidth could catch up.
This project in particular is also the result of a curious local quirk: the area of town where I live has a very strong culture of ‘curb crawling’, in that neighbors frequently put unwanted items on their curbs free for the taking! One day last summer I was biking around town when I came upon one of these treasure caches and pulled over to take a look. Among the knick-knacks and a cool bell beaker-shaped glass vase was a plain stainless water bottle (of the sort I had spotted onscreen in Episode II several years back), so I took it home and cleaned it up. The size was actually smaller than the onscreen one – holding only a pint or so – but I thought it might be a useful bit of hydration kit. Since I already have some great in-universe canteens, and this bottle was too small to be a proper canteen, I thought it might be useful for holding some other fluid (electrolyte concentrate? Corellian whisky?), and began brainstorming how I might carry it in a pack or on my person. One way the Star Wars galaxy has always felt like a real setting is the use of repeated visual elements which give a sense of cultural continuity and cohesion. Among my favorite of these is the ubiquitous cylinder carried at the rear of the wearer’s belt:

Let’s get crafting!

Galactic Style Guide – Duffel Bags

Welcome back to another installment of the Galactic Style Guide, the series where we break down the ‘Star Wars aesthetic’ in order to help you create a more authentic ‘outer persona’! While the Galactic Starcruiser may no longer be taking on passengers and has instead been gathering dust for the last year, there’s never a bad time to do a little research and try to improve your ‘Star Wars eye’. Following up on our last entry, this month we’re looking at a specific type of soft, in-universe luggage, duffel bags!
Just a quick FYI/programming note before we begin: this entry is fairly quick and dirty, but there’s a good reason: my wife and I bought a house last month, and real life takes priority over hobbies, naturally! We’ve made lots of progress, but we’re still knee-deep in renovations and expect to be well into the New Year, but hopefully things go smoothly and I can get back to more regular and in-depth posting before too long. With that said, let’s get started!

Dark Horse’s Republic #80 (2005) with art by Doug Wheatley features padawan Noirah Na in the aftermath of Order 66, lugging around a large duffel bag as a backpack. Plus, for those following along after our last entry, a suitcase! What d’you know: it checks all of our boxes (interesting shape, logo and text free, muted color, and pre-Rollaboard design)!

keep reading for more examples!

Galactic Style Guide – Luggage

Welcome back to another installment of the Galactic Style Guide, the series where we break down the ‘Star Wars aesthetic’ in order to help you create a more authentic ‘outer persona’! While the Galactic Starcruiser may no longer be taking on passengers and has instead been gathering dust for the last year, I’m long overdue to examine examples of in-universe LUGGAGE! Back in its heyday, many Starcruiser passengers considered a themed suitcase essential for voyage immersion, but most of the ones I saw went pretty far off the mark from what we actually see onscreen…but there’s never a bad time to do a little research and try to improve your authentic ‘Star Wars eye’!
(But first, a quick FYI/programming note before we begin: this entry and next month’s are fairly quick and dirty, but there’s a good reason: my wife and I just bought a house, and naturally, real life takes priority over hobbies! I fully expect to be knee-deep in renovations well into the New Year, but hopefully things go smoothly and I can get back to more regular and in-depth posting before too long. With that said, let’s get started!

There aren’t many (if any?) examples of what we would recognize as luggage in the Original Trilogy. Luke has his blue backpack and a couple of trunks on Dagobah, but that’s about it – most everyone travels extremely light otherwise! It’s not until Episode I that we get a good look inside a ship’s cargo hold to see what traveling gear looks like in-universe.

The scene in which Padme cleans R2-D2 gives us our best look:

What does in-universe luggage have in common?

Galactic Style Guide – Binoculars

Welcome back to another installment of the Galactic Style Guide, the series where we break down the ‘Star Wars aesthetic’ in order to help you create a more authentic ‘outer persona’! It’s been a while since we’ve looked at any in-universe hardware, but in this installment, we’re digging deep into a specific type of gear used in the field across the galaxy: space binoculars!
A good set of binocs (whether macro- or electro-) are a great accessory to help add depth to an appropriate character impression, filling in for the collapsible brass telescope or ‘field glasses’ frequently carried by characters in various SW-influencing historical genres – whether that be swashbuckling pirates, Old West cowboys, or World War soldiers.
Let’s get started with our ur-example: the Lydree MB450 macrobinoculars carried by Luke back in SW’77:

keep reading to see TONS more examples!

Galactic Style Guide – Mechanics and Technicians I

Welcome back to another installment of the Galactic Style Guide, the series where we break down the ‘Star Wars aesthetic’ in order to help you create a more authentic ‘outer persona’! By audience request, in this entry we’re trying something different! This time around, we’re not looking at a specific category of clothing or gear, but a specific “character class”! Just like with our regular Style Guide entries, the idea is still to analyze examples of a single theme to see what they share – and therefore see what the most common and representative elements are, hopefully to prevent the spread of reenactorisms! As always, there’s plenty of room in the Galactic Costumed-Arts Spectrum for fun and personal interpretations, but if (as I believe is entirely possible) the GFFA is to be seen as a legitimate setting for high-quality living history, it really pays to take a page from the reenacting playbook and try to represent the common galactic populace as faithfully as possible…which means sticking to the visual ‘rules’ of the setting. What are those rules for mechanic/technician characters? Let’s find out!

As the majority of SW titles continue to revolve around face characters from the more ‘exciting’ (i.e. typically martial) character classes (Jedi, fighter pilots, bounty hunters, troopers, etc.), we have a relatively small pool to draw from, at least when it comes to live-action. Our first look at this type of character comes from act three of SW’77, with our heroes’ arrival at the Rebel base on Yavin IV.

(We’ll see Rebel hangar crews continuing to dress like this before Endor as well)
Keep reading

Building the Alliance Pilot – Part 3: Hard Kit

The pilot build is coming right along, and now we’re in the final stretch: with clothing (aka ‘soft kit’) items out of the way, this time we’re adding on the various accessories that really help sell the snubfighter pilot look! First up is (per the Rogue One visual guide) a “Novaldex Diagnostech life support unit”, aka chestbox!

When I started this pilot project, I was still working commission-to-commission, and for a starving artist, shelling out $100+ for a vacformed or 3D printed chestbox was something I wasn’t comfortable doing. Now that I have a more regular source of income, I can see that it’s not that much to pay, but I still wanted to do my part and keep the DIY-craftsman ethic alive. Never one to turn down a good problem-solving challenge, I decided to scratchbuild my own. I knew this element would be the most involved, so I started work on it last August. From a measured diagram I produced a foldable pattern, which I turned into a ‘Mark 1’ pepakura using shoebox cardboard in about a week:

Despite the resin/rondo coatings, it was still too flexible and the sides wouldn’t stay quite square; it simply wasn’t worth the effort it was going to take to make it work, so I decided to cut my losses and start over, thus avoiding the ‘sunk cost fallacy’ (i.e. believing something is worthwhile just because you’ve invested a lot of time or money into it). I was still a little dispirited all the same, so I had to bide my time until the right material appeared. Come early December, I found some small sheets of Masonite for another couple bucks at my local secondhand craft shop and laid out my Pep pattern on these. This time, the material was rigid enough to not flex or require much post-processing.

let’s add some details, pilot-style!

Building the Alliance pilot – Part 2: Soft Kit

In our last post, I laid out my plan to push the boundaries of Original Trilogy pilot style in a simple, believable way: take the iconic ANH look and swap the orange flightsuit for a tan one. It may be a minor change, but it’s also an effective one – let’s get started and break it down layer by layer!

The flightsuit in question is my old tan standby from Wampawear – originally purchased for a hypothetical New Republic Archeological Corps shovel bum impression. That may have fizzled out, but the elements I initially gathered for it are as solid as ever. All the weathering you see is 100% honest and natural: every time over the last 4 or 5 years when I’ve had to work on my car (oil changes, brakes, pushing out dents, lug stud swaps, etc.) I’ve worn this flightsuit, and in the process have built up a really impressive pattern of real wear in authentic places. In person it’s absolutely filthy looking, but on camera it just reads as extra well-used. I hesitate to wash it because I’m so pleased with the patina but I’m also aware that doing so would probably be good for the garment. If I do, it will likely just be handwashed with little (if any) detergent.
(Boots are Finnish military jackboots I snagged from Varusteleka years ago.)

From the beginning, the ejection harness was one component I really wanted to do in as authentic or realistic a manner as possible. While it’s an obvious stylistic homage to the parachute harnesses of WW2, it doesn’t quite make much sense—there’s just not that much to it, comparably. Apparently, Rebel Legion folks just safety pin or Velcro the naked top end of their harness webbing to the flak vest or flight suit, which I find completely un-immersive! I wanted this to really feel like a piece of in-universe military gear – one I wouldn’t be afraid to be seen suiting up in – so I came up with a simple over-the-shoulder design that would still remain unseen under the shoulders of the flak vest.

Continue getting dressed, pilot-style!

Project: Thermos canister facelift

If it seems like a long time since we’ve had a standalone project to show off, you’re not wrong! We haven’t been idle lately, it’s just that everything we’ve been working on has been towards one specific, very detailed goal. Every now and then, however, something comes along and begs our attention for a week or two.

A funny observation I’ve made lately: whenever I go out shopping (ever on the lookout for gear or materials I can use for reenacting), every time I grumble to myself, “This place never has anything good!”, then something tends to comes up! Last November I popped into my local Goodwill having just complained that such a civilized thrift shop would be a terrible place to find pieces for my Middle-earth kits……only to score a gorgeous maroon 100% wool blanket for just $2 (!!!). Then a few months ago, while accompanying my wife on an outing to TJMaxx, I found myself was grumbling how the clothes there are all made of polyester and any ‘hard kit’ type items are always so ‘consumer-grade’ and never made for rigorous galactic use. Well, wouldn’t you know it, in among the reusable water bottles I found this double-thermos canister…thing:

“[It] may not look like much, but [it’s] got it where it counts”

This Hydraflow POD measures up at about 9.5 inches tall; the top section holds about a pint, and the lower section holds nearly a liter! There’s a spot under the lid for a folding spoon, which turned out to be pretty terrible. However, it’s triple insulated, is pretty much a blank canvas for retooling with in-universe style, and best of all, is made of steel (90% recycled!). Unlike the last Thermos I reworked, this one is watertight, tough, and ready for real use in the field!

In keeping with the authentic aesthetic seen on screen, I knew it wouldn’t take much to SWarz this up – a more neutral color and some weathering would be about it. The first step would be to tackle the screw-on lid.

Continue reading “Project: Thermos canister facelift”

Galactic Style Guide – Ammo belts and Pouches III

Welcome back to another installment of the Galactic Style Guide, the series where we break down the ‘Star Wars aesthetic’ in order to help you create a more authentic ‘outer persona’! In this entry, we’re concluding our examination of the various styles of belt gear and pouches seen onscreen by looking at Original and Prequel examples together – let’s get started! In the first two entries, we focused on military-surplus (or milsurp style) gear, so this time we’re looking at the few non-milsurp examples.

Our two male heroes have belt gear which seems military but (as far as I know) isn’t – if you can’t swing actual milsurp, you can’t go wrong with real, unadorned leather in one color, and minimal hardware (snaps and brass studs, at most):

One of the ‘Pruneface’ commandos in Episode VI has an intriguing cylindrical belt pouch, which I believe was also borrowed for Wilford Brimley’s character a few years later:

What do we think it is? Optic case of some sort? Milsurp or not?

One of the places where we see a decidedly different style in action is among the ‘scum and villany’ at Jabba’s palace. Let’s break it down:

Continue reading “Galactic Style Guide – Ammo belts and Pouches III”

Galactic Style Guide – Ammo belts and Pouches II

Welcome back to another installment of the Galactic Style Guide, the bimonthly series where we break down the ‘Star Wars aesthetic’ in order to help you create a more authentic ‘outer persona’! In our second entry looking at the various styles of belt pouches and bandoliers seen onscreen, we’re focusing on military surplus (and milsurp-style) examples as seen in the Prequel Trilogy.
Let’s begin (again!) on Tatooine!

Throughout Episode I, we see young Anakin Skywalker wearing one half of an Italian Army ammo pouch for the Carcano rifle (plus another mystery pouch):


Several of the background characters in Mos Espa have belt gear with ‘Lift The Dot’ fasteners; these appear to be a dual-magazine pouch very similar to this WW1-era pouch for the Colt 1911. As I discussed previously, I feel that these kinds of pouches are acceptable for outfitting far-background characters like these, but I feel they toe the line of ‘visible fasteners’. However, they’re usually very sturdily made to stand up to the rigors of authentic use, so if you are reenacting or doing living history with an audience inside the 10-foot line, it’s probably worthwhile to take the extra effort to cover them behind some canvas or webbing.

Jedwar Seelah, Chokk, and the unnamed Nikto podrace mechanics.
keep reading for more examples!