Tag: Rogue One

Building the Alliance Pilot – Part 3: Hard Kit

The pilot build is coming right along, and now we’re in the final stretch: with clothing (aka ‘soft kit’) items out of the way, this time we’re adding on the various accessories that really help sell the snubfighter pilot look! First up is (per the Rogue One visual guide) a “Novaldex Diagnostech life support unit”, aka chestbox!

When I started this pilot project, I was still working commission-to-commission, and for a starving artist, shelling out $100+ for a vacformed or 3D printed chestbox was something I wasn’t comfortable doing. Now that I have a more regular source of income, I can see that it’s not that much to pay, but I still wanted to do my part and keep the DIY-craftsman ethic alive. Never one to turn down a good problem-solving challenge, I decided to scratchbuild my own. I knew this element would be the most involved, so I started work on it last August. From a measured diagram I produced a foldable pattern, which I turned into a ‘Mark 1’ pepakura using shoebox cardboard in about a week:

It might not look like it, but this thing is noticeably warped/skewed and far from square.

Despite the resin/rondo coatings, it was still too flexible and the sides wouldn’t stay quite square; it simply wasn’t worth the effort it was going to take to make it work, so I decided to cut my losses and start over, thus avoiding the ‘sunk cost fallacy’ (i.e. believing something is worthwhile just because you’ve invested a lot of time or money into it). I was still a little dispirited all the same, so I had to bide my time until the right material appeared. Come early December, I found some small sheets of Masonite for another couple bucks at my local secondhand craft shop and laid out my Pep pattern on these. This time, the material was rigid enough to not flex or require much post-processing.

let’s add some details, pilot-style!

Galactic Style Guide – Zippers

Welcome to another installment of our ‘Galactic Style Guide counterpoint’ subseries, where we help you strengthen your ‘Star Wars eye’ by highlighting and remedying common faux pas that can make your kit look Not Star Warsy. As part of the GSG, the ultimate goal is still to help you create a more accurate ‘outer persona’ – but we approach the goal from the opposite direction!
This month, we’re taking a look at one of the specific elements which George Lucas decided would have no place in his Star Wars aesthetic – zippers! (For our look at the other form of visible fastener Lucas specifically didn’t want to see, see this previous entry).

If I were to ask you when you first learned that Lucas didn’t want to see zippers and buttons onscreen, there’s a very good chance it was sometime after 2014 and the release of Brandon Alinger’s excellent SW Costumes – The Original Trilogy. However, the no-visible-fastener rule had already been in print for at least seven years: discussed in Rinzler’s The Making of Star Wars (2007), on page 125. What accounts for the delay before this fundamental GFFA costuming rule became truly widely known is, I think, social media; Facebook was still in its relative infancy in 2007. Since then however, the top-down Lucas directive has become frequently-cited in costuming circles, and yet cosplayers and Batuu-bounders still try to excuse visible zippers in their costumes; typically, this involves pointing to a screenshot of Luke Skywalker zipping up his flightsuit in Episode V:

Remember, per our sources, Lucas said he didn’t want to see such fasteners, not that they didn’t exist at all (many seem to have trouble with this distinction). Why Luke’s zipper (and presumably, those of all the other onscreen pilots and technicians) is perfectly permissible is simple: once worn, it isn’t visible – it’s hidden by a flap! (If you can think of a way to convey a pilot suiting up for battle by donning a one-piece flightsuit without showing them zipping it up, I am all ears!) However, there are a fair number of other characters whose costumes do include uncovered zippers: luckily for us, these tend to fall into one of two categories; unluckily for us, things seem to have taken a step backwards in the modern era…

keep reading for plenty of examples from the lucas and disney eras!

Galactic Style Guide – Backpacks II

Welcome back to another installment of the Galactic Style Guide, the bimonthly series where we break down the ‘Star Wars aesthetic’ in order to help you create a more authentic ‘outer persona’! In this entry, we’re returning to our examination of in-universe backpacks, this time focusing on some less rigid examples, encompassing not just backpacks but also things like satchels and bedrolls.
As we said last month, this kind of unassuming and field-functional gear is woefully underrepresented among the GFFA costuming community (who tend to go for eye-catching and…less-than-functional). This is too bad, because a good pack can really elevate an impression and make it feel like a living, breathing kit and not just a costume: it shows the viewer “I am a real individual with needs beyond what I carry on my belt or in my pockets.”
Let’s dive in and get some ideas!

The softpack that gets the most screentime in the Lucas films is probably the one Luke totes Yoda around in during his Jedi training. As far as I know, nobody has yet identified it as a milsurp piece (though the buckles might be?) so it may have been made in-house for Episode V. If anyone has any details on it, please share them below in the comments!

keep reading for more in-universe backpack inspo

Searching for Rebel trooper helmet variations

Almost as soon as I finished my ‘fleet trooper’ helmet back in 2017, I started planning a ‘donut’ helmet build, which I hoped would remedy all the complaints I had of the ‘swoop’ helmet: it would be smaller, more mobile, quieter, and much better at blending in with woodland scenery. However, on the off chance that I ever feel like busting out my ol’ swoop again, I’ve still kept my eyes open for examples of documented swoop helmet variations that might be a little more woodland guerilla-friendly. Sure, it would be easy to say, ‘Ehh, I’m sure a Rebel cell somewhere must have painted their helmets to blend in better, just make something up!’ But for accurate reenacting and living history, the bar is a little higher, and we can’t settle for fan creations on DeviantArt—we need examples from the visual record! Therefore, I wanted to share the examples of non-standard Rebel ‘swoop’ helmets that I’ve been able to dig up in hopes that they might be of use to someone else in the same boat. Enjoy!

These swoop-less helmets (art by Brian Schonburg) appear in Rules of Engagement, the Rebel SpecForces Handbook (1997).

seven more examples after the jump!

Galactic Style Guide – Comm badges

Welcome back to the Galactic Style Guide, the monthly series where we take a close look at the elements that make up the ‘Star Wars aesthetic’ to help you build a more accurate ‘outer persona’!
In this installment, we’re focusing on the little doodads that everyone seems to have on their vests and jackets nowadays. Official sources can’t agree on what they are—the Complete Visual Dictionary refers to them as a ‘rank plaque’, ‘rank insignia’, ‘communications badge’, or ‘command insignia’, while I believe the RougeOne reference guide calls them ‘personal transponders’, so who knows? Despite not appearing in the original Star Wars ’77, these devices have gained in popularity (especially among the ‘Batuu-bounding’ crowd) after frequent inclusion in many post-Disney materials. Since 9 times out of 10 they’re worn by Rebel Alliance characters, we didn’t see Any in the Prequel era (I could be wrong, though; leave a comment below if you know otherwise!)

Only two styles of badge are seen in Episode V. These use easily-castable or vacuformable shapes and components with brightly colored buttons. The first (we’ll call it Hoth #1) is worn by our three lead characters and the hangar technicians, suggesting they are transponders and not related to rank.

Hoth #1: worn around Echo Base by Luke Skywalker, Han Solo, Leia Organa, and hangar technicians

Continue reading “Galactic Style Guide – Comm badges”

Artifact ID: Lyra Erso communicator

As explained in my earlier post of 24 June, I’m approaching the artifacts of Rogue One at arm’s length and with a grain of salt, under the understanding that the film is a materially-correct but narratively inaccurate holodrama. In this post, we’re looking at the belt communicator of the character ‘Lyra Erso’.
(Credit for successful detective work and identification goes to Rebel Legion forum member ‘the.rebel.agent’.)   What did it start its life as?

R1 lyraComm

Continue reading “Artifact ID: Lyra Erso communicator”

Artifact ID: G3 cleaning kit

Our Rogue One identification series continues, with a very useful–and very accessible–piece of German hardware that you can use to diversify your Star Wars-reenacting ‘hard kit’.R1 G3box
Credit for this goes to German contributor ‘T.K.’, whose eagle eyes were able to identify the gray-and-yellow box on the shoulder of ‘Cassian Andor’ as a familiar bit of Deutschland militaria.
Continue reading “Artifact ID: G3 cleaning kit”