Living History in the Star Wars Galaxy

Artifact ID: Refugee’s water bottle

In the spirit of Christmas and the Nativity (even though Jesus of Nazareth was most definitely Not born at midwinter), I wanted to publish something with a Mary and Joseph, poor-folk-on-the-road theme.
On a recent rewatch of Episode II (focusing on scenes with background commoners), I noticed something in the scene on the refugee transport. I’m surprised I never noticed it before, considering it’s so shiny and eye-catching…
padme_h2O-1

padme_h2O-2 — They couldn’t even bother to swap out the stopper for something even *slightly* more in-universe.

Yes, as Obi-Wan says, “Your eyes can deceive you” and that we shouldn’t trust them. However, in this case, seeing is believing, because that is quite clearly an unmodified, off-the-shelf, stainless steel water bottle sitting on the table between Padme and Anakin.

At first, a small part of me wondered if it was even meant to be there. Continue reading “Artifact ID: Refugee’s water bottle”

Differentiating the Jedi persona

This post is a follow up to my earlier musings on the trade-off between public recognizability and authenticity. After some careful consideration, I finally made some decisions that allow me to have my cake and eat it too, while also helping to better distinguish my Jedi persona as being based in the Imperial era.
darktimesjedi_plain Continue reading “Differentiating the Jedi persona”

Building the Inner Persona: Vocabulary

Updated terms in italics
One of the later steps (#7 of 8) in Townsend’s Getting Started series is the process of further developing one’s persona through building of the ‘inner persona’. This means going beyond the superficial outer persona (one’s clothes and gear), and better inhabiting the mental headspace of your chosen individual. One great way to do this is through the words we use for things.
For example, if I were portraying an American settler in the early 1700s, referring to the indigenous population as “Native Americans” would smack of modern political correctness; but to refer to them as “savages” or “naturals” would be quite appropriate. Likewise, to greet someone with the postmodern “Whatsup?” in a 19^th century reenacting context would be quite jarring!

Downsides to Research: Accuracy vs Recognition

As part of the research that yielded my Service Corps insignia patch, I came upon a detail that has led me to a dilemma.
In Part 2 of Daniel Wallace’s The Jedi Path, the various paths that a Jedi initiate may take are outlined: whether to go on to become a Padawan apprentice, to ‘wash out’ and join the Service Corps, or to leave the Order entirely and rejoin the ‘civilian’ galactic community.
In addition to the text, this is illustrated visually:
initiate_paths
From this depiction, it appears that the Service Corps (center bottom) is differentiated by use of less layers of clothing (forgoing the tabards in favor of a tunic—with contrasting collar!—only)? My question is: How representative or stylized is this image?.…The token AgriCorps guy with the Mohawk also looks to be going with a simple tunic-only outfit.
The Jedi Path, as an in-universe textbook, is supposedly dated to 115 BBY… BUT, the comic series Act on Instinct—set during the Clone Wars—depicts a young AgriCorps member, Sanya, who does appear to wear tabards:
Sanya
In fact, her outfit looks like a regular Prequel Jedi, just in navy blue, and with wrapped forearms. Additionally, this character would be about the same age as Silo, and so might be seen as the closest analogue to my persona?
However… Continue reading “Downsides to Research: Accuracy vs Recognition”

Snagging a Speeder Bike (with Math!)

In Guerilla Warfare, that wonderful time capsule of 1940s partisanship, Burt ‘Yank’ Levy describes an excellent way of ambushing a rapidly-moving, mounted fascist:

“A good way to stop a motor-cyclist is by stretching a quarter-inch cable or wire across a roadway. If you are sure a motor-cyclist is coming, put it up beforehand. Otherwise, have a brick tied to one end of it and be ready to sling it across the road, where others will secure it, while the Nazi is a mile away. Attach the wire to trees or fence-posts at a height of from three to three and a half feet from the ground…preferably, string your line diagonally across the road, at an angle of about 30 degrees. The effect of this will be to make the motor-cyclist, when he hits it, slide along it and into the ditch…right near where you and your companions are waiting” (72).

Reading this the other night, I started to wonder: if I was a member of a Rebel cell needing to ambush a pursuing scout trooper, how much time would I have in which to throw my cable across the path before he appeared?

Ewoks apparently prefer the first, pre-set system, as above.

Continue reading “Snagging a Speeder Bike (with Math!)”

Recipe: Yoda Stew

(as made BY Yoda, not WITH Yoda!)

This has been shared all over in the last 34 years, but I thought it would be fun to include here as there are so few edible connections to make with the GFFA.
While I wish this was the actual recipe that was served on-set in Yoda’s house (any leads would be amazing!), we’ll have to make do. The recipe originates with the 1983 adaptation of The Empire Strikes Back made by National Public Radio, who solicited gourmet chef Craig Claiborne to come up with something to approximate Yoda’s ‘rootleaf’ stew of the film.

The finished product might look like something made out of swamp-sourced ingredients, but it tastes very much like a modern Indian dish!
Continue reading “Recipe: Yoda Stew”

Artifact ID: Nubian saltshakers

We’re talking about these thingies:

HP-9282
These items have always stuck out to me as a prime example of the prop shop guys grabbing whatever was on the shelves at the time and using them as background details (Episode I is full of this). I think it’s kind of cool, from my 18-years removed perspective, how the clean lines of late ‘90s tech were easily appropriated for Naboo-ian tech.
Continue reading “Artifact ID: Nubian saltshakers”

Rebel propaganda project: ‘Liberty for All’

Back about the time last year when I started entertaining the idea of starting a dedicated Rebel persona, I was also thinking about potential outlets and activities I could do. The one that I kept coming back to— inspired by a childhood spent surrounded by living history types at Civil War battlefields—was a public ‘recruitment drive’ for the Rebel Alliance. In brainstorming such an event, I thought that having some propaganda to display would be a good way to add atmosphere.
liberty_fin And so, I started looking to see what was out there. Unsurprisingly, there is a metric ton of Star Wars-themed propaganda on the internet, but not much of it is ‘official’. I wanted something I could talk about in-universe if questioned, and I sure didn’t want to have to tell people that the artwork came from DeviantArt user ‘L314_Forever’ or something.

Luckily, I came across reference to a book recently published, containing a multitude of in-universe artwork: Star Wars Propaganda: A History of Persuasive Art in the Galaxy. While some of the pieces seemed a little lackluster or Photoshop-y, I really liked this one (by ‘Tavris Bahzel’): Continue reading “Rebel propaganda project: ‘Liberty for All’”

Building the Outer Persona: an authentic Gaderffii

Back in the beginning of the year, when I was only doing an AgriCorps Jedi impression, I started thinking about what it might look like to do a living history ‘display’ in the GFFA. For actual historic periods, displays at events often take the form of a collection of soldier’s gear laid out for the public:
VnamLHDisplay
In my mind’s eye, I thought it might be interesting, starting out, to simply have a collection of in-universe ‘artifacts’ for the public to examine, which could function as potential ‘engagement hooks’ for interpretation. Continue reading “Building the Outer Persona: an authentic Gaderffii”

Building the Jedi Persona: 4.1 – Canteens

As promised earlier, I’ll begin with a quick writeup on the mysterious canteen which DK has put to triple use as a GFFA prop-base.
canteen-plastic Dimensions: approximately 6 x 8 x 2 inches.
Capacity: approximately 1250 milliliters, which is about 250 more than most of my other canteens (my WW2 Russians, US, and UK are all just a hair over or under a liter), which is pretty nice. However, getting this maximum capacity involves getting any air out of the top section next to the spout. I wonder if–based on the similar shape of my vintage icepack–this canteen was meant for cold weather use?, as the top section might allow for extra expansion during freezing?
My canteens are both clearly marked ‘US’ in a recessed area (on the other side of the props), and ‘1 US 1993 H.T.P.’ on the bottom. Continue reading “Building the Jedi Persona: 4.1 – Canteens”