One of the largest stumbling blocks to getting a real-world-functional GFFA kit is the lack of references to everyday material culture in the Galaxy. We have little evidence, for example, of the kinds of containers your average galactic citizen has around the house—do the citizens of Bespin have Tupperware? And as someone with an interest in creating a realistic—but recognizably Star Wars-y—set of outdoor-adventure gear, this is a wall I have often run into. When we have so few resources to draw on, we instead have to get creative in our solutions. In this case, since we have little gear to draw aesthetic inspiration from, why not draw inspiration from the gear that influenced the aesthetic we aspire to?
Viewed through modern eyes, it’s pretty clear that the original Trilogy films are products of the 1970s and 80s…so let’s take a look at late 70s and early 80s Tupperware and Thermos products!
Continue reading “Applied geometry: Star Wars style”
Category: Projects
Project: modding the Naboo winter shirt
(My apologies for the unintentional hiatus, dear readers. Back-to-school is a hectic time, but as I get back into the swing of things, I am able to get back to work on projects and keeping up the blog.)
Between the cooler temperatures, low humidity, and new-fallen leaves (ideal for making debris shelters and leaf mattresses), it’s no surprise that autumn is the go-to season for most reenactors.
Even though the events that are most welcoming for a Star Wars ‘living historian’—sci-fi cons and the like—are traditionally held in air-conditioned hotels in summer, there is no reason why you should limit yourself to such controlled indoor events! I believe that if this particular hobby is to (one day ) be taken seriously by the larger Historic reenacting community, we should be as equipped as they are to deal with weather of all seasons, and not be afraid to get Out of the convention center!
Continue reading “Project: modding the Naboo winter shirt”
Building the Rebel persona – 4.1: Naboo soft kit
Based on the broad trends noted in the previous post, I decided that my Naboo civilian impression would need (at minimum) a tunic, trousers, and tall boots, and possibly an outer layer as well.
The tunic would need to follow local style, and so be in a muted color, have an overlapping and/or asymmetrical closure, a high Mandarin collar, and long sleeves, probably without cuffs.
Continue reading “Building the Rebel persona – 4.1: Naboo soft kit”
Building the Outer Persona: a three-season pack
While I’ve been humping my Bergan external frame pack around for almost a decade (and I’m very pleased with it!), I’ve been starting to wonder if maybe it isn’t…overkill. As an aspiring minimalist, I like to try and pare my outdoors kit down to the bare essentials, and a large frame pack with lots of attachment points—in a gear version of Jevon’s Paradox (as one’s pack increases in capacity, the expanded space cannot help but be filled)—only makes it too easy to throw in everything but the kitchen sink.
I realized then that while the Bergan is perfectly suited to be a winter pack—able to carry a tarp, sleeping pad, and blanket/sleeping bag, plus a drybag of spare clothes and other seasonal necessities—I might need something a bit more modest for the rest of the year. Continue reading “Building the Outer Persona: a three-season pack”
The Cure for Temporal Headaches
Whenever you begin putting together a new persona (in any setting, fictional or historical), it always helps to firmly ground yourself in a specific time. This is simply Good Living History—the narrower the range, the more focused your research can be, contributing to a more accurate impression. If you’re portraying a ‘longhunter’ (an 18th century market hunter), you don’t want to be drawing your ‘outer persona’ (aka clothing and accoutrements) from the 1720s or 1790s (even though they’re technically still in the 18th century); rather, you would focus on the 1750s through 1770s, since that’s the period in which these folks operated. If you have enough information from primary or secondary sources, you can even pin your impression down to a specific year, month, or week (this becomes easier to do the closer to the present one gets, as the amount of raw information (and therefore, potential sources) increases exponentially).
Deciding on a specific span of time makes your persona more authentic, especially if you’ve done your research.
Continue reading “The Cure for Temporal Headaches”
Crafting the Coldweather Hat
After acquiring a Swedish winter cap for $10, I had originally planned to do just a few simple modifications—removing the superfluous rear buckle, replacing the fake fur of the flaps with wool, and then giving it a dunk in some brown RIT dye.
However, the more I looked at the Pfilbee Jhorn pictures, the more I felt that simply relying on the similar shapes of his hat and the Swedish one wouldn’t be enough to make this an authentic piece.
Continue reading “Crafting the Coldweather Hat”
Building the Rebel persona: 5.1a – ‘Endor Donut’ Helmet
After finishing construction of my Rebel ‘swoop’ helmet last July, I started to feel that it might not be the best fit for a Rebel militiaman on Sulon, or more specifically, that it wasn’t the most practical choice.
Although there are a few other designs from EU sources, the Rebels’ only other proper helmet we know from the films is that worn by the Rebel strike team as seen in Episode VI, so by September I had begun weighing the pros and cons.
Continue reading “Building the Rebel persona: 5.1a – ‘Endor Donut’ Helmet”
Rebel propaganda project: ‘Liberty for All’
Back about the time last year when I started entertaining the idea of starting a dedicated Rebel persona, I was also thinking about potential outlets and activities I could do. The one that I kept coming back to— inspired by a childhood spent surrounded by living history types at Civil War battlefields—was a public ‘recruitment drive’ for the Rebel Alliance. In brainstorming such an event, I thought that having some propaganda to display would be a good way to add atmosphere.
And so, I started looking to see what was out there. Unsurprisingly, there is a metric ton of Star Wars-themed propaganda on the internet, but not much of it is ‘official’. I wanted something I could talk about in-universe if questioned, and I sure didn’t want to have to tell people that the artwork came from DeviantArt user ‘L314_Forever’ or something.
Luckily, I came across reference to a book recently published, containing a multitude of in-universe artwork: Star Wars Propaganda: A History of Persuasive Art in the Galaxy. While some of the pieces seemed a little lackluster or Photoshop-y, I really liked this one (by ‘Tavris Bahzel’): Continue reading “Rebel propaganda project: ‘Liberty for All’”
Building the Outer Persona: an authentic Gaderffii
Back in the beginning of the year, when I was only doing an AgriCorps Jedi impression, I started thinking about what it might look like to do a living history ‘display’ in the GFFA. For actual historic periods, displays at events often take the form of a collection of soldier’s gear laid out for the public:
In my mind’s eye, I thought it might be interesting, starting out, to simply have a collection of in-universe ‘artifacts’ for the public to examine, which could function as potential ‘engagement hooks’ for interpretation. Continue reading “Building the Outer Persona: an authentic Gaderffii”
Building the Jedi Persona: 4.1 – Canteens
As promised earlier, I’ll begin with a quick writeup on the mysterious canteen which DK has put to triple use as a GFFA prop-base.
Dimensions: approximately 6 x 8 x 2 inches.
Capacity: approximately 1250 milliliters, which is about 250 more than most of my other canteens (my WW2 Russians, US, and UK are all just a hair over or under a liter), which is pretty nice. However, getting this maximum capacity involves getting any air out of the top section next to the spout. I wonder if–based on the similar shape of my vintage icepack–this canteen was meant for cold weather use?, as the top section might allow for extra expansion during freezing?
My canteens are both clearly marked ‘US’ in a recessed area (on the other side of the props), and ‘1 US 1993 H.T.P.’ on the bottom. Continue reading “Building the Jedi Persona: 4.1 – Canteens”
Living History in the Star Wars Galaxy 