Projects – Page 3 – Living History in the Star Wars Galaxy

More galactic whittling – CR70 corvette

It’s been quite a while since I’ve had any new Star Warsy whittlings to show off! I had planned to do some whittling along the Appalachian Trail last year (and found the perfect little neck-knife in a hiker box)…but unfortunately hiking 15-20 miles a day doesn’t leave time for much else besides eating and sleeping. I actually carved up this little consular ship last midwinter, and forgot I had been sitting on it for a whole year! Unlike the Republic cruiser I last whittled, this one was made out of poplar, so I was able to include a much higher level of detail:

It’s almost certainly Blockade Runner nostalgia, but I think this line of ships look so much better seen from an aft perspective.

Contrary to popular belief, while they look very similar, this is NOT the same model ship as the iconic ‘blockade runner’ of Episode IV!

persistent inaccuracies and more pictures below!

Project: Naboo pistol retool

Near the end of last year, while scrolling through some Star Wars groups on facebook I came across someone showing off a bunch of white and fluorescent orange plastic blaster props made by Rubies. While otherwise just another pointless ‘hey look the stuff i ordered got delivered’ post, one of them was something I had no idea even existed in a mass-produced form—the Merr-Sonn Q2 hold-out pistol. (Fun fact: supposedly this blaster was designed by George Lucas himself, and was prototyped from sketch to prop in just one day). While it wasn’t made by them, as a pre-teen in 1999 such a weapon is permanently associated in my mind with Padme Amidala and the planet Naboo, especially given its decidedly un-militaristic Art Deco styling. Seeing that such a replica existed (and was readily affordable!), I realized that including a Q2 in one of my Naboo-based impressions would be a great way to better connect kit and homeworld—especially since those ‘outer personas’ diverge from what most people think of when they picture Naboo style (the typical ‘Renaissance’ style is really a nobility thing).

Since this model blaster is only ever wielded onscreen by Padme or her handmaidens, I had always assumed it was a specially-made pistol just for Royal use. However, skimming through some RPG materials I came across the Q2 included in a listing of common blasters of the Galaxy, where it was listed as acceptable for use in the pre-Empire, Imperial, and New Republic periods—perfect for any of my needs!

this was much more than just a paintjob!

Project: Spacer’s Duffel (part 2)

It’s been awhile since I’ve checked in on this project, which was stuck on the back burner for much of last year but has been moving forwards slowly but surely. Inspired by a description of typical spacers traveling the spacelanes with a sturdy duffel bag (FFG Edge of the Empire: Enter the Unknown p.53), my goal is to create an in-universe ‘steamer trunk’ covered with souvenirs of galactic travel for use with my New Republic Archeological Corps impression.

Before getting too carried away with the weathering and distressing, I wanted to first add a few in-universe patches! A brief browse through Etsy or facebook’s SW Patch Collectors group will reveal a mind-boggling number and variety of Star Wars-themed embroidery, but somewhat unsurprisingly the vast majority are not suitable for living history purposes: face characters, divergent stylistic interpretations, pop culture mashups, event commemoratives, and general ‘novelty’ designs (i.e. things that make me ask, “WHYYYY?”) abound. If that group is any indication, lots of folks want patches that let others know they are a Star Wars Fan, but not so many are interested in authentically inhabiting the Star Wars setting…disappointing. However, a few daring individuals have been producing patches that actually reflect an in-universe style!

More patches (and where you can get your own) below!

Project: Thermal Detonator facelift

In the course of my research on real-world historical partizan kits, I’ve found the most common items carried by WW2 guerrillas are binoculars, grenades, and knives or bayonets. Since I’m always trying to improve my Rebel partizan impression, I thought having a bit of ‘personal artillery’ (Rebel Alliance Sourcebook, p100) would be a fun way to add some authentic weight to a vest pocket, giving a better living-history understanding of what it would feel like to be equipped in-universe. Around the same time, KR Sabers released an all-metal thermal detonator kit. It was a thing of beauty…but it also cost $200+…and I simply could not justify spending that much on something that was just for looking shiny on a display table or taking up space in a pocket. (Plus, for some reason, high-end propmakers always insist on including things like explosions or character voice soundclips in their electronics, which actually decreases the immersion for me. Anyone else feel the same way? Leave a comment and let me know your thoughts!). Since I couldn’t justify the cost for something that didn’t do anything besides look cool and flash lights, how could I add some authenticity to my kit without breaking the bank?

A295 rifle conversion update 3

The pandemic project saga continues! Last time I checked in, I was stuck at bottlenecks on the remaining stock, scope, and magazine fronts that kept me from proceeding, but after my usual lull, I again have something worth sharing!

-the StG’s wooden stock needed to be replaced with a metal ‘T’ stock; and as my potential welding instructor is in the COVID high-risk category, I outsourced this element to a machinist friend of mine.

Even more galactic whittling: Gozanti cruiser

Amazing what a transformation a coat of paint can accomplish!

For my latest ‘galactic folk art’ adventure, I decided to make a civilian-model Gozanti cruiser, partially inspired by the post-Disney Imperial incarnation featured in ‘The Heiress’. This ship has been around since at least 32 BBY (its first appearance was taking off outside Mos Espa in Episode I), so it’s a solid fit for any of my personas to carry in a pocket:

Whenever I’m feeling stressed out, in a funk, or down on myself (usually after spending too much time on social media and comparing my own slow progress and accomplishments with other folks’ flashy projects!), I find a great coping mechanism is to pick up some small project that can be completed with short turnaround. Whittling is a great choice for these kinds of projects, as I find the act of whittling by itself to be very grounding and meditative. However, the ‘in the flow’ quality of the work means that I always forget to take in-progress pictures, reinforcing my FOMO of not keeping up with the social media Joneses! (Aaahh, what difficult-to-navigate times we live in. 😉

Upgrading the Rebel persona: captured armor #2

While a good partizan should ideally do all their ambushing from a distance, after binge-watching a cool edutainment series on the SOE training curriculum (Churchill’s Secret Agents—highly recommended) this summer, I realized that sometimes up-close-and-personal hand-to-hand combat can’t be avoided. Adding to this realization were nightly examples earlier this summer of my city’s ‘finest’ beating protestors with batons just a few blocks away from my apartment. With these motivations in mind, I started thinking about what kinds of hard kit items I might use to improve my odds in the area of personal defense.

Project: B1 battle droid arm (part 2)

Just in time for Halloween, I’m proud to finally be able to show off a project that’s downright skeletal!:

When we last checked in, my battle droid arm project had been printed, resin-filled, cleaned up and given a base coat of paint. Next came the fun part: assembly! To allow them the proper range of motion, the hand and forearm joints were articulated with turned pins and set screws, as it appears the original was made (although I have not yet added the tiny set screws in the fingers; my thumb can do more than just rotate in a circle, as it has an actual captive ball-and-socket):

As you can see, I really need to add some extra-grungy finger grime!

To really sell the artifact as a battlefield relic, I originally wanted to include some cables or wires poking out of the top of the shoulder, but my research turned up the surprising conclusion that such details wouldn’t be necessary.

Upgrading the Rebel persona: captured armor

Reb-leg 202010-2 When I started putting together a Rebel partizan impression a few years back, I initially had the idea—inspired by real-life guerillas’ practice of appropriating enemy equipment—to include a piece or two of captured Imperial hardware in the kit. I was very aware of the temptation to overdo it…too many cosplayers let their imaginations run wild and pretty soon a simple ‘Rebel fighter’ costume becomes an unrealistically fully-armored supertrooper. Since s Alliance doctrine holds that “complete freedom of movement is more useful than the dubious protection provided by armor—which rarely stops a blaster bolt anyway” (WestEndGames, Rebel Alliance Sourcebook, p99), we don’t have a ton of examples of Rebels wearing extensive armor; even this more modern source depicts a Rebel ‘heavy’ gunner with only an arm’s worth of armor:

reb-heavy — FantasyFlightGames: *Age of Rebellion* – Forged in Battle, p 82

I reasoned that while a Rebel partizan would probably do most of their shooting from a prone position, anything to give an advantage in taking a stable shot would be desirable, so with this in mind (and to keep things simple), I decided to order a single Stormtrooper shin/calf from Walt’s Trooper Factory, along with a ‘sniper’ knee plate: Continue reading “Upgrading the Rebel persona: captured armor”

Upgrading the Rebel persona: uniform tunic

Over the years, I’ve acquired a number of different ‘in-universe’ garments. Some are based on examples from film or print sources, some are extrapolations based on planetary styles, some are just attempts to apply the generic ‘galactic aesthetic’ to my everyday wardrobe.

But so far, I haven’t tried to outright copy a specific example…the closest I’d come was the ‘bib’-front shirt I whipped up for the debut of my ‘Citizen Olis’ persona in 2017, meant to be a local take on the style worn by the Rebel ‘fleet troopers’ and Yavin communications officers seen in Episode IV: