Rebel – Page 2 – Living History in the Star Wars Galaxy

Project: Thermal Detonator facelift

In the course of my research on real-world historical partizan kits, I’ve found the most common items carried by WW2 guerrillas are binoculars, grenades, and knives or bayonets. Since I’m always trying to improve my Rebel partizan impression, I thought having a bit of ‘personal artillery’ (Rebel Alliance Sourcebook, p100) would be a fun way to add some authentic weight to a vest pocket, giving a better living-history understanding of what it would feel like to be equipped in-universe. Around the same time, KR Sabers released an all-metal thermal detonator kit. It was a thing of beauty…but it also cost $200+…and I simply could not justify spending that much on something that was just for looking shiny on a display table or taking up space in a pocket. (Plus, for some reason, high-end propmakers always insist on including things like explosions or character voice soundclips in their electronics, which actually decreases the immersion for me. Anyone else feel the same way? Leave a comment and let me know your thoughts!). Since I couldn’t justify the cost for something that didn’t do anything besides look cool and flash lights, how could I add some authenticity to my kit without breaking the bank?

A295 rifle conversion update 3

The pandemic project saga continues! Last time I checked in, I was stuck at bottlenecks on the remaining stock, scope, and magazine fronts that kept me from proceeding, but after my usual lull, I again have something worth sharing!

-the StG’s wooden stock needed to be replaced with a metal ‘T’ stock; and as my potential welding instructor is in the COVID high-risk category, I outsourced this element to a machinist friend of mine.

Upgrading the Rebel persona: captured armor #2

While a good partizan should ideally do all their ambushing from a distance, after binge-watching a cool edutainment series on the SOE training curriculum (Churchill’s Secret Agents—highly recommended) this summer, I realized that sometimes up-close-and-personal hand-to-hand combat can’t be avoided. Adding to this realization were nightly examples earlier this summer of my city’s ‘finest’ beating protestors with batons just a few blocks away from my apartment. With these motivations in mind, I started thinking about what kinds of hard kit items I might use to improve my odds in the area of personal defense.

Upgrading the Rebel persona: captured armor

Reb-leg 202010-2 When I started putting together a Rebel partizan impression a few years back, I initially had the idea—inspired by real-life guerillas’ practice of appropriating enemy equipment—to include a piece or two of captured Imperial hardware in the kit. I was very aware of the temptation to overdo it…too many cosplayers let their imaginations run wild and pretty soon a simple ‘Rebel fighter’ costume becomes an unrealistically fully-armored supertrooper. Since s Alliance doctrine holds that “complete freedom of movement is more useful than the dubious protection provided by armor—which rarely stops a blaster bolt anyway” (WestEndGames, Rebel Alliance Sourcebook, p99), we don’t have a ton of examples of Rebels wearing extensive armor; even this more modern source depicts a Rebel ‘heavy’ gunner with only an arm’s worth of armor:

reb-heavy — FantasyFlightGames: *Age of Rebellion* – Forged in Battle, p 82

I reasoned that while a Rebel partizan would probably do most of their shooting from a prone position, anything to give an advantage in taking a stable shot would be desirable, so with this in mind (and to keep things simple), I decided to order a single Stormtrooper shin/calf from Walt’s Trooper Factory, along with a ‘sniper’ knee plate: Continue reading “Upgrading the Rebel persona: captured armor”

Upgrading the Rebel persona: uniform tunic

Over the years, I’ve acquired a number of different ‘in-universe’ garments. Some are based on examples from film or print sources, some are extrapolations based on planetary styles, some are just attempts to apply the generic ‘galactic aesthetic’ to my everyday wardrobe.

But so far, I haven’t tried to outright copy a specific example…the closest I’d come was the ‘bib’-front shirt I whipped up for the debut of my ‘Citizen Olis’ persona in 2017, meant to be a local take on the style worn by the Rebel ‘fleet troopers’ and Yavin communications officers seen in Episode IV:

A295 rifle conversion update 2

Quarantine projects continue! It took a while to figure out and execute, but after my usual lull, I again have something worth sharing! While molding and casting the familiar V8 greeblies on the front of the receiver was pretty straightforward, these side greeblies on the rear receiver were another story.
a295sidegreebs Continue reading “A295 rifle conversion update 2”

A295 rifle conversion update

The quarantine project queue continues apace! It’s been a couple months since I started my functional A295 blaster rifle project, so I thought it was time for an update on how things are progressing.
Since I’m not scratchbuilding a prop gun, the steps to convert from StG44 to A295 are actually relatively simple, and most everything is reversible:

-Step 1: cut off the protruding rod* (okay, that one’s not reversible 😉

gas20200307 — *fun fact: since it doesn’t have a cleaning rod or ramrod, this post originally allowed three soldiers to make a tripod and keep their rifles out of the muck.

Continue reading “A295 rifle conversion update”

In search of the functional ‘blaster’ rifle

If you’ve been wondering why I haven’t posted in far too many weeks, this is one of the reasons. Don’t worry, projects are proceeding apace!
A295-StG44 Hothrifle *I use EU terminology. If you’re into post-Disney stuff, just replace any instance of ‘A295’ in the following with ‘A280C’*

About a year back, I began toying with the idea of retooling my SKS into a more GFFA-style slugthrower. Eventually, though, I had to resign myself to the limitations of the Simonov platform, and abandoned the idea. However, a few weeks ago, someone in the Endor Commando facebook group was seeking help on a A280 prop rifle they were planning…and I got the bug again. I never liked the looks of the Endor rifle…it just seemed clunky and ugly to me (the alternate version with the triangle buttstock especially so) – give me an A295 Hoth rifle any day!
A280 a295 Owing also to having more time onscreen and the easier availability of the base gun*, I see way more prop A280s online. At the same, I got to thinking about what folks these days could use to build an A295 prop out of, and one fellow pointed out the most accurate base rifle would be AGM’s all-metal electric airsoft StG44, which retails for $235; he commented that it would be awfully expensive “for something you will be cutting up” for a prop rifle. I agreed, but this led me to my next question: well, what if you were cutting it up, but it was still a functional rifle? And just out of curiosity, how cheap could I do it for?
Continue reading “In search of the functional ‘blaster’ rifle”

Project: modding the Naboo winter shirt

(My apologies for the unintentional hiatus, dear readers. Back-to-school is a hectic time, but as I get back into the swing of things, I am able to get back to work on projects and keeping up the blog.)

silk_beforeafter

Between the cooler temperatures, low humidity, and new-fallen leaves (ideal for making debris shelters and leaf mattresses), it’s no surprise that autumn is the go-to season for most reenactors.
Even though the events that are most welcoming for a Star Wars ‘living historian’—sci-fi cons and the like—are traditionally held in air-conditioned hotels in summer, there is no reason why you should limit yourself to such controlled indoor events! I believe that if this particular hobby is to (one day ) be taken seriously by the larger Historic reenacting community, we should be as equipped as they are to deal with weather of all seasons, and not be afraid to get Out of the convention center!
Continue reading “Project: modding the Naboo winter shirt”

Building the Rebel persona – 4.1: Naboo soft kit

Based on the broad trends noted in the previous post, I decided that my Naboo civilian impression would need (at minimum) a tunic, trousers, and tall boots, and possibly an outer layer as well.
shirt
The tunic would need to follow local style, and so be in a muted color, have an overlapping and/or asymmetrical closure, a high Mandarin collar, and long sleeves, probably without cuffs.
Continue reading “Building the Rebel persona – 4.1: Naboo soft kit”