Upgrading the Rebel persona: captured armor

Reb-leg 202010-2When I started putting together a Rebel partizan impression a few years back, I initially had the idea—inspired by real-life guerillas’ practice of appropriating enemy equipment—to include a piece or two of captured Imperial hardware in the kit. I was very aware of the temptation to overdo it…too many cosplayers let their imaginations run wild and pretty soon a simple ‘Rebel fighter’ costume becomes an unrealistically fully-armored supertrooper.  Since s Alliance doctrine holds that “complete freedom of movement is more useful than the dubious protection provided by armor—which rarely stops a blaster bolt anyway” (WestEndGames, Rebel Alliance Sourcebook, p99), we don’t have a ton of examples of Rebels wearing extensive armor; even this more modern source depicts a Rebel ‘heavy’ gunner with only an arm’s worth of armor:

reb-heavy
FantasyFlightGames: Age of RebellionForged in Battle, p 82

I reasoned that while a Rebel partizan would probably do most of their shooting from a prone position, anything to give an advantage in taking a stable shot would be desirable, so with this in mind (and to keep things simple), I decided to order a single Stormtrooper shin/calf from Walt’s Trooper Factory, along with a ‘sniper’ knee plate: Continue reading “Upgrading the Rebel persona: captured armor”

Upgrading the Rebel persona: uniform tunic

Over the years, I’ve acquired a number of different ‘in-universe’ garments. Some are based on examples from film or print sources, some are extrapolations based on planetary styles, some are just attempts to apply the generic ‘galactic aesthetic’ to my everyday wardrobe.

But so far, I haven’t tried to outright copy a specific example…the closest I’d come was the ‘bib’-front shirt I whipped up for the debut of my ‘Citizen Olis’ persona in 2017, meant to be a local take on the style worn by the Rebel ‘fleet troopers’ and Yavin communications officers seen in Episode IV:

Continue reading “Upgrading the Rebel persona: uniform tunic”

Project: Jedi ‘SCUBA tank’

This project has spent far too much time in the WIP drawer, but I’m happy to say that after a recent bit of prime scavenging, it’s finally finished up!
A99-finished20200805-1.jpgAfter assembling my first functional kit (Silo, washout Jedi from the Agricultural Corps) for Star Wars living history purposes in 2016, I first got the idea to add some Jedi accoutrements about two years ago. I was using the impression to teach mini survival workshops, and since Silo didn’t have a lightsaber, I figured he should at least have some recognizable Jedi gear in his belt pouches to help sell the impression. I reckoned the Aquata A99 breather would be a good fit, since I could use it as a prop to underline the first element of the Rule of Threes—you can’t last three minutes without breathable air.
I couldn’t wait to get started on a new project, so I pulled out my reference books and…immediately ran into a roadblock. Continue reading “Project: Jedi ‘SCUBA tank’”

Project: B1 battle droid arm (part 1)

In the last several years of browsing Star Wars crafting topics on social media, I’ve determined that about 95% of replicas (especially 3D-printed ones) I’ve seen are of weapons, helmets, and armor associated with a tiny range of recognizable-to-the-public Face Characters or nameless Troopers. You will almost never see mundane artifacts replicated in the prop-building community…as one RPF user asked while seeking info on how to replicate a Kloo horn, “Anyone have any ideas or did nobody ever care because it’s not a lightsaber?”

As I was brainstorming my NRAC (New Republic Archeological Corps) persona last year, I began thinking about what kinds of artifacts I could potentially show off at a convention booth, hands-on interpretive historical talk, or similar venue/event. With Naboo’s focus on arts and learning, and the presence of a notable institution of higher education (Theed University—which coincidentally has the same initials as my alma mater), I felt confident in basing my NRAC impression on a Naboo background. I then began thinking what kinds of items would likely be collected or excavated by a Naboo archeological student, or possibly artifacts that could’ve been passed down through the family.
Around the same time, I saw someone online post pictures of a 1:1 3D-printed B1 battle droid:B1 il_794xN1521245503_mg8s.jpg‘Wow!’ I thought, ‘that would be amazing to display!’ Unfortunately, I was also living in a very small apartment at the time, and there was no way I had the space to store an almost-2-meter-tall figure I might use for a handful of events each year (if I was lucky!). Also, in terms of realism, what are the odds that my archeologist persona would have a complete B1 droid?
‘Okay’, I said. ‘How about just, like, an…arm?’ Continue reading “Project: B1 battle droid arm (part 1)”

A295 rifle conversion update 2

Quarantine projects continue! It took a while to figure out and execute, but after my usual lull, I again have something worth sharing! While molding and casting the familiar V8 greeblies on the front of the receiver was pretty straightforward, these side greeblies on the rear receiver were another story.
a295sidegreebs Continue reading “A295 rifle conversion update 2”

A295 rifle conversion update

The quarantine project queue continues apace! It’s been a couple months since I started my functional A295 blaster rifle project, so I thought it was time for an update on how things are progressing.
Since I’m not scratchbuilding a prop gun, the steps to convert from StG44 to A295 are actually relatively simple, and most everything is reversible:

-Step 1: cut off the protruding rod* (okay, that one’s not reversible 😉

gas20200307
*fun fact: since it doesn’t have a cleaning rod or ramrod, this post originally allowed three soldiers to make a tripod and keep their rifles out of the muck.

Continue reading “A295 rifle conversion update”

The issue of Original Characters

It’s been a while since I’ve done a ‘back to basics’ post, so we’re taking a break from the usual projects-and-research content and taking a turn for the nitty-gritty. The vexing issue this week is that of the ‘OC’, or ‘Original Character’ (differentiated from a recognizable ‘Face Character’). Stick around at the end for a list of character ideas to take your OC to the next level!

After hanging around a popular SW cosplay facebook group for the last few years, I have noticed a pattern that my historical-authenticity-focused mind finds quite aggravating: Continue reading “The issue of Original Characters”

In search of the functional ‘blaster’ rifle

If you’ve been wondering why I haven’t posted in far too many weeks, this is one of the reasons. Don’t worry, projects are proceeding apace!
A295-StG44 Hothrifle*I use EU terminology. If you’re into post-Disney stuff, just replace any instance of ‘A295’ in the following with ‘A280C’*

About a year back, I began toying with the idea of retooling my SKS into a more GFFA-style slugthrower. Eventually, though, I had to resign myself to the limitations of the Simonov platform, and abandoned the idea. However, a few weeks ago, someone in the Endor Commando facebook group was seeking help on a A280 prop rifle they were planning…and I got the bug again. I never liked the looks of the Endor rifle…it just seemed clunky and ugly to me (the alternate version with the triangle buttstock especially so) – give me an A295 Hoth rifle any day!
A280 a295Owing also to having more time onscreen and the easier availability of the base gun*, I see way more prop A280s online. At the same, I got to thinking about what folks these days could use to build an A295 prop out of, and one fellow pointed out the most accurate base rifle would be AGM’s all-metal electric airsoft StG44, which retails for $235; he commented that it would be awfully expensive “for something you will be cutting up” for a prop rifle. I agreed, but this led me to my next question: well, what if you were cutting it up, but it was still a functional rifle? And just out of curiosity, how cheap could I do it for?
Continue reading “In search of the functional ‘blaster’ rifle”

Project: The Jedi Path – an exercise in distressing

One of my eventual goals for my NRAC impression is to attend an event and publicly ‘interpret’ a collection of in-universe artifacts from the Star Wars galaxy in first-person. While I’m always on the lookout for such items, it is especially fun when one comes along that seems tailor-made for this purpose.
TJP_before-after2 Continue reading “Project: The Jedi Path – an exercise in distressing”

NRAC: Building the Outer Persona – Tracker Vest

Yet again, keeping up a flow of regular postings becomes difficult due to various project delays and bottlenecks, but rest assured, I have not been idle in the hiatus! I have two 3D printed commissions on their way, picked up a new skill that I can use to create ‘primitive’ cultural artifacts, and I spent a large chunk of my Spring Break hard at work on a new vest for my archeologist impression, and I am very pleased with the results.
AKT-TUV Continue reading “NRAC: Building the Outer Persona – Tracker Vest”